Bearing housings are divided into three main categories: integral bearing housings, split bearing housings, and sliding bearing housings.
Integral Bearing Housings
Integral (non-separable) pedestal bearing housings feature a bearing housing cover secured with screws. These pedestal bearing housings can be utilized in conventional pedestal bearing housings, however they were originally designed as axle boxes for light rail trucks.
Non-separable pedestal bearing housings are more rigid than separable ones and can bear heavier loads. Outer spherical bearing housings also fall under the category of integral housings.
Outer spherical bearing housings, also known as bearing units, are referred to as outer spherical bearing housings when they do not include the bearing. These housings are categorized into the 200 series, 300 series, and XOO series based on the bearing series. According to their shape, they are classified into pedestal housings (P housings), square housings (F housings), diamond housings (FL housings), round housings (C housings), convex round housings (FC housings), convex square housings (FS housings), concealed housings (PA housings), and hanging housings (FA housings).


Split Bearing Housings
Split bearing housings, known as “Wàhé” in northern China, have a detachable upper cover and base and mainly bear radial loads.They work well with self-aligning ball bearings and spherical roller bearings that have tapered and cylindrical bores. This category includes the SN series (SN200, SN300, SN500, SN600), SD series (SD500, SD600, SD200, SD300, SD3000, SD3100, SD3200), SNU series (SNH, SNV, SNF, SNK, SNG – different company designations for similar specifications), SNL series, 1500 and 1600 series, Z2500Y, Z2600Y series, and GZ2 and GZ4 series models. They offer good thermal conductivity, easy installation and removal, and significantly improved seal effectiveness.

The 722500 series is conventionally included in the SN series of bearing housings. The 7225(00) series flanged bearing housings consist of a housing base plate with a shaft accommodation hole and a bolt-fixed cover. They come in two forms based on size: a triangular base plate for sizes up to 13, and a square base plate for sizes 15 and above. Depending on the base plate form, the housings are fixed to the support surface with three or four bolts. Flanged bearing housings of the 7225(00) series are offered in through-shaft and shaft end variants.
Sliding Bearing Housings
Sliding bearing housings typically adhere to Chinese national standards and refer to bearing housings that do not use bearings but instead use bronze alloys as substitutes. The product series include H2000, H4000, HXOOO, ZHC200, and ZHC400 series.


In the next article, we will detail the materials used in bearing housings.Additionally, for information on deep groove ball bearings, cylindrical roller bearings, outer spherical bearings, spherical roller bearings, angular contact bearings, tapered roller bearings, linear bearings, optical axes, lead screws, rails, and sliders, you can refer to other articles on our website. For any related inquiries, feel free to contact me at any time.



