The operating environment of bearings is crucial for their performance and lifespan, especially in extreme conditions, such as extremely high or low temperatures, which put their quality to the test. In a previous article, we discussed the ultimate guide to high-temperature bearings; in this article, we will explore all information related to low-temperature bearings, including their working principles, when to use them, and why they are essential in certain industries.
Low-temperature bearings are specially designed to operate effectively in extremely cold environments, sometimes as low as -60°C or even lower. Ordinary bearings may fail in low temperatures due to material brittleness or lubricant solidification, while these bearings typically rely on specific lubricants and materials to ensure smooth operation even when oils or greases undergo viscosity changes due to cold. They are indispensable in industries such as aerospace, deep-sea exploration, and polar scientific research, where stable performance is required in cold climates.
Next, let’s explore some common questions regarding low-temperature bearings and their performance in cold conditions.
At what temperature do bearings fail?
Bearings operating in high-temperature conditions, typically above 100°C, may lead to several issues:
Lubricant degradation: The upper working temperature limit for most lubricants is between 120°C and 150°C. Excessive temperatures can cause lubricants to evaporate, increasing friction between internal components and ultimately damaging the bearings.
Material dissolution: Steel is the most commonly used material in bearings. Under high temperatures, the hardness of steel decreases, and deformation may occur. At temperatures between 200°C and 250°C, steel can directly degrade. For sealed bearings, at these temperatures, the nitrile rubber seals degrade, ultimately leading to bearing failure.
Bearings operating in low-temperature conditions, typically below -20°C, may lead to several issues:
Lubricant hardening or freezing: Ordinary lubricants can become viscous or even freeze in low temperatures, failing to provide effective lubrication. This lubricant failure can cause bearings to seize or wear out quickly. Low-temperature bearings use special low-temperature lubricants to ensure normal operation in environments as low as -60°C or even -100°C.
Material brittleness: At extremely low temperatures, bearing materials can become brittle and are prone to cracking or deformation.
What is the normal temperature range for ball bearings?
The normal operating temperature range for ball bearings is from -65°F to 300°F (-55°C to 149°C). However, the exact temperature range may vary depending on the type of bearing and the lubricants used. Bearings operating in colder environments often require specialized low-temperature lubricants to ensure they retain their functional characteristics at extreme temperatures.

In general, when selecting bearings for extreme temperature environments, both the bearing materials and lubricants must be considered to ensure effective operation under both cold and hot conditions.
Why are low-temperature bearings crucial in industry?
Low-temperature bearings are essential for industries that operate equipment in extreme cold conditions. For instance, in aerospace, deep-sea exploration, polar scientific research, and the wind turbine industry, challenges frequently arise in cold climates. Without suitable bearings, machinery may fail, leading to costly downtime and repairs.

For example, in deep-sea exploration, equipment often needs to operate in extremely low temperatures. Deep-sea submersibles, when conducting deep-sea exploration, must dive to depths of several thousand meters, where temperatures are usually very low, often close to freezing. Using low-temperature bearings ensures that all moving parts of the submersible operate smoothly and safely in these harsh environments.
How to choose the right low-temperature bearings for your business?
Choosing the right low-temperature bearings depends on several factors. First, consider the operating temperature range to ensure that the machinery runs at low temperatures, ideally below -40°C. Next, consider the type of bearing based on the application; for high-speed environments, low-temperature ball bearings are recommended, while roller bearings are preferable in low-speed or heavy-load environments. Lastly, regarding bearing materials and lubricants, it is important to select materials suitable for low temperatures, such as stainless steel, ceramics, or specialized alloys, to avoid brittleness in cold environments. Low-temperature bearings typically require special lubricants that do not easily solidify, ensuring smooth operation in low-temperature conditions.
Summary
Low-temperature bearings are critical components for industries operating in extreme cold conditions. Using suitable materials and lubricants ensures that machinery continues to operate smoothly even in sub-zero environments. If you have any questions about low-temperature bearings, please contact NYZ, and our engineers will provide you with the best industry solutions.



